Chernobylite – Best PC Graphics Settings

I will mention that the game is kind of heavy both for the Graphics Card as well as the CPU. But the mentioned best PC graphics settings should give you enough juice to fetch decent FPS and Visual Quality from the game.

Best PC Graphics Settings for Chernobylite

Chernobylite Game Guides and Troubleshooting gamertagero

System Specs for Chernobylite Game

Before proceeding with the guide, make sure you meet the minimum system specifications for the game. If you do not meet them, chances are that your results may differ from mine. Hence this step is highly advised.

MINIMUM:

    • OS: Windows 7 SP1 (x64)
    • Processor: Intel Core i5-2500K CPU
    • Memory: 8 GB RAM
    • Graphics: Geforce GTX 660/GTX 1050/GTX 770M or AMD Radeon R7 260/Integrated Ryzen 7 4800H
    • DirectX: Version 11
    • Storage: 40 GB available space
    • Additional Notes: 30 FPS @ LOW Video Settings

RECOMMENDED:

    • OS: Windows 7 SP1 (x64), Windows 8 (x64), Windows 10 (x64)
    • Processor: Intel Core i7 4790k CPU
    • Memory: 16 GB RAM
    • Graphics: Geforce GTX 970/GTX 1060 or AMD Radeon RX 480/RX 570
    • DirectX: Version 11
    • Storage: 40 GB available space
    • Additional Notes: 30 FPS @ Ultra Video Settings / 60 FPS @ HIGH Video Settings

Best In-Game Graphics Settings

Geometry Quality Medium
Foliage Quality High
Draw Distance 100%
Shadows Medium
Textures Ultra
Effects Medium
Anti Aliasing TAA
Antialiasing Quality High
Contact Shadows ON
Lens Flare ON
Chromatic Aberration OFF
Bloom ON
Motion Blur OFF
Depth Of Field ON
DLSS OFF
AMD FSR 1.0 OFF
Resolution Scale 100%

Chernobylite Best PC settings gametagzero

I aimed to test the game for 900p @60FPS. The Resolution used was 1600×900. For the most graphically intense parts, the Framerates dropped to 51-53FPS. Other than that It maintained the standard 60FPS and was above the mark.

System Specs Used

CPU used AMD Ryzen 5 3600. The Graphics Card used was an Entry-level GTX 1050 TI OC with 4GB worth of Memory. RAM Memory used was 16GB with a base frequency of 3000MHz.

ALSO READ:  My Time At Sandrock - How To Increase Character Stats

I always use the latest OS for the games so a 64-Bit Windows 10 was used here. The storage I used was an SSD with 500GB worth of space and a 2200-speed amp.

Results and Conclusion

As I mentioned earlier, I managed to maintain 60FPS with decent visuals at the above settings. If you demand more out of the system there are certain things you can do to achieve that.

The first one would be to lower the graphics to medium-low. Then you can lower the render resolution from 65-75%. this will make the game look somewhat blurry, but if Framerates is all you need then this will do the job.

My personal preference to play a single-player game like Chernobylite would be to sacrifice some Frames for better visuals. As long as it is meeting your minimum FPS demands, try to run the game at the medium-high settings.

You can turn on AMD FSR 1.0 as well but the implementation in this game is flawed. It looks very dull once turned on, so do it at your discretion.

That would be all from this guide. Do leave your suggestions and/or queries in the comments below. Thanks for reading and I will see you at the next one!


Last Updated on January 14, 2024

Leave a Comment

Your email address will not be published. Required fields are marked *