Evil Dead: The Game – Best Graphics Settings Guide

In this guide, I will try to show you the best graphics settings for Evil Dead: The Game, along with the DLSS settings I used to get decent FPS. I hope the settings will fetch you good framerates and performance.

Evil Dead The Game Best Graphics Settings 1

The Best Graphics Settings for Evil Dead: The Game

When it comes to graphics options for this game, I found it quite limited. However the small elements had a large impact when it came to the visuals. For that reason, every setting in this game is important and should be taken note of.

Evil Dead The Game Minimum Requirements

These are the bare minimum system specs to run the game, so make sure you at least meet them.

  • CPU: Core i5-4590 / AMD FX-8350
  • RAM: 8 GB
  • OS: Windows 10 64 bit
  • VIDEO CARD: GeForce GTX 960 / Radeon R9 270
  • PIXEL SHADER: 5.1
  • VERTEX SHADER: 5.1
  • DEDICATED VIDEO RAM: 2048 MB

Evil Dead The Game Recommended Requirements

 These are the recommended settings or specs for Evil Dead: The Game. If you want to experience the game at its best, this is the way to go!

  • CPU: Core i7-7700 / Ryzen 2600X
  • RAM: 16 GB
  • OS: Windows 10 64 bit
  • VIDEO CARD: GeForce GTX 1070 Ti / Radeon RX 5600 XT
  • PIXEL SHADER: 5.1
  • VERTEX SHADER: 5.1
  • DEDICATED VIDEO RAM: 6144 MB

In-Game Graphics Settings for Evil Dead: The Game

As I mentioned earlier, I found the options to tweak quite limited. I wish there were more options to change a lot of elements that I would or would not want in the game. An example of this would be the unwanted motion blur I saw.

NVIDIA DLSS

Auto (This improved my framerates to some extent. After that, you can tweak the sharpness as per your liking)

DLSS Sharpness

0.7 (I found this to be the aptest for my eyes, This reduced the blurriness to some extent, but it was still there)

Display Mode

Fullscreen (For a game like this, you will want to play on fullscreen to experience it to the fullest)

View Distance

Medium (You can play on High, but Medium was fine for me, and I could see enemies from far even with medium settings)

Post Processing

High (This was changing the environment quite a bit. If you are running a medium-low-end system, set this to medium)

Shadows

Medium (This was the lowest I could go. This does take a lot of frames, so keep this to Medium or High if you are on an RTX 3080 or higher)

Textures

High (This makes the game look as good as your system can handle. Does take up some resources but is totally worth it)

Effects

Low (Effects do take up framerates, are and are known to fluctuate FPS as they happen, so keep it medium or low)

Shading

Medium ( I could not spot a large difference between High and Medium, but it was taking up a few frames, so this is Medium for me)

Vertical Synchronization

Off (Also called Vsync, this will lock your FPS to 60 if you keep this ON. Ideally if you are not facing fluctuations, turn this off)

Tessellation

On (This is totally GPU-centric setting. If you are not running an RTX Card, turn this off. This smoothens out edges even more.)

Evil Dead The Game Best Graphics Settings 2

  • Here is a video Link for the same – Link
ALSO READ:  Tales of Arise | How To Toggle HUD Elements On/Off

What System Did We Use To Test?

These are the system specs I used to test Evil Dead: The Game:

  • GPU – RTX 3060Ti FE
  • CPU – Ryzen 5 5600x
  • RAM – 32GB DDR4 (@3000MHz)
  • OS – Windows 10 64Bit
  • Cooling – Liquid (240mm AIO)
  • Storage – 1TB Nvme M.2 SSD

Results and More Tips for Performance

The game should not lag or stutter with the above or similar systems and settings. Still, you would want to do the following:

  • Disable unwanted background apps
  • Set Power Saving to High-performance
  • Disable NVIDIA and/or Windows Game Bar
  • Clean up your PC using any PC Cleaner (I personally use CCleaner)
  • Keep your SSD and HDD in a Healthy State. This is quite a common but often overlooked step that causes major lag and stuttering issues.
  • Cooling for your System should be top-notch.

With the above settings, I got an average FPS of about 145. For those of you who are running low to medium-end rigs, for example:

  • GTX 1650, GTX 1660, GTX 1070 or a 1050Ti
  • and for processors – i3, i5, i7, Ryzen 5 series processors

Keep the textures to medium and tessellation, along with post-processing to medium/low.

TIP! – You can tweak the resolution for the game by opening the Settings.ini file for Evil Dead: The Game. The Path should be

  • AppData > Config > WindowsEditor – Located inside My PC > Your Username

That is all I am sharing in this guide for the best graphics settings for Evil Dead: The Game. Leave your queries and thoughts down in the comments below.

You can follow us on Twitter and drop a like on Facebook to get the latest updates on guides for Mobile Games, PC Games, Fixes, and Settings.

We also have a YouTube channel where we upload the latest gaming content for PC and Android. Feel free to check that out at your own leisure. Do you have specific suggestions? You can submit them here. Thanks for reading!


Last Updated on January 20, 2024

Leave a Comment

Your email address will not be published. Required fields are marked *