How To Score More Points In Dorfromantik

Hey, I want to tell you how I broke the 100k threshold. My highest score is 22k. but I didn’t stop and got past 29k. My absolute highest was 36k. And if you follow the same steps you can also achieve it. Make sure you read it carefully and do all the things which I have told in this guide.

How To Score More Points In Dorfromantik

However, I saw people reaching 100k, 200k, and even 500k! I didn’t think this was even possible, but all those people couldn’t be cheaters, so there had to be a way. I started researching strategies for achieving higher scores.

Nobody seemed to have a simple answer, but by combining bits and pieces of information from multiple sources. I finally came up with a strategy that seemed promising. I put it to the test, and immediately it worked like magic! In that game, I made it to 270k! Currently, I’m playing a game where I made it to 325k so far, and I have well over 100 tiles left.

So how do I do it, you wonder? I’ll tell you in 7 simple steps!

  • Quests

This seems obvious, but it has to be mentioned: at the beginning of your game, your focus will be on quests since early quests are finished quickly. But with time, quest requirements grow. So, quests alone will not sustain you. This is why most people don’t get past 20k or 30k points. They focus on quests almost exclusively, and eventually and inevitably they run out of tiles on the way.

  • Perfect Tiles

If you’re a player looking to boost your high score, you probably already know this: surrounding a tile with six other tiles in such a way that you match all biomes on each side perfectly will reward an extra tile for your stack.

By that, I mean match meadow with meadow, forest with forest, wheat field with the wheat field, house with the house, and so on. So potentially, you can get seven extra tiles by placing just one tile, assuming everything on all tiles fits perfectly.

As quest requirements increase, perfect tiles will keep you afloat in between finishing quests. Eventually, finishing quests will become something you do “accidentally” while looking for perfect tiles.

  • Closing Quests

When you finish a triangle quest and a flag appears in the town, forest, or field you’ve been working on, the extra quest is for you to close off all openings for an additional bonus. Usually, this is not very rewarding compared to the extra effort you have to put in.

My advice is to grow a large field or forest or town and eventually have multiple flags in it before you close it if you choose to do so.

I’m talking at least five, better eight or ten! This could be something you set up and then do as life insurance should you ever start to run low on tiles! I once closed a forest with multiple quest flags and got 56 tiles for that!

However, there is a hidden advantage when it comes to closing quests: this also resets your quest requirements! Most people don’t seem to know this.

I didn’t for the longest time! One of the reasons why many players don’t want to close off a huge forest, for example, is that their forest quests have risen to astronomical numbers.

They think if they close it off, they will never be able to finish another forest quest again since they would have to regrow another huge forest first! This is wrong!

When quests are generated, the game looks at your largest forest that is still open and adds a few trees on top of it for the quest requirement. This is why closing a large at the right time can make all the difference!

Also, if you are about to uncover a bonus quest, and from the shape of the preview, you already know it’s going to be a forest quest, for example, and you have a huge forest about to close, consider not unveiling the bonus quest until after you have closed your large forest. That way, the bonus quest will have a much lower requirement.

  • Purposefully Failing Quests

Most people don’t seem to know, and in the beginning, I had no idea myself, but there is no penalty for failing a quest. The game generates more quests for you if you don’t have a lot of open ones.

It doesn’t care if you botched a quest or finished one, if a quest is over, you will soon be presented with a new one. This means you should be somewhat picky when it comes to the quests to choose from.

If a quest is an inconvenience if it’s not worth your time, fail it and wait for a better one to come along!
Bonus quests you uncover along the way do not count as open quests, by the way, and neither do flags.

  • Making Sacrifices

I’ve mentioned sacrificing quests, but now we have to talk about sacrificing perfect tiles. I’ve only recently noticed this, but for the longest time, what held me back in achieving higher scores was my OCD-induced ridiculous level of perfectionism.

ALSO READ:  FNAF Security Breach - Up Up and Away Achievement Guide

I couldn’t bear to place a tile if it meant five sides were perfect, but the sixth side wasn’t. I would rather wait for the perfect tile, even if it meant it never came, and instead, I ran out and lost the game.

It is important to strike a balance between playing perfectly and cutting your losses if you need to. You cannot let perfection be the enemy of progress!

I’ve learned this the hard way, but it is better to accept small flaws to achieve a greater goal. Five, four, even three perfects instead of six may not sound appealing to some, but especially in a pinch, this is totally fine. It’s certainly better than none!

  • Take Your Time

Especially as the map grows larger and larger, it is sometimes necessary to scroll the entire length from north to south and from east to west in order to find the perfect place for your current tile.

Sometimes you even have to do that twice! When I look for tile placements, if I find a good spot, I don’t place it immediately.

I keep looking and only if there are no better spots do I return to the previous place and use my tile. Remember that there is no time limit or penalty, even if you take several minutes for a decision!

I noticed I would subconsciously make decisions faster and more frenzied the closer I got to running out of tiles. Of course, you should do the exact opposite, taking more time the fewer tiles, you have, to make sure you’re maximizing your chances!

A good memory also helps in finding the best spots, but it’s no substitute for checking and double-checking!

  • Play Smart

With time you will inevitably learn which tiles are helpful and which aren’t. Generally speaking, any tile with lots of meadows is a good tile, but any tile that features three different biomes and only one or no meadow isn’t very helpful.

It’ll also be much easier to remember that (and where) you need a tile with 5 sides meadow and one side wheat field, for example, than to remember where you have to place a tile with a house, a field, two trees, another house, and another field.

You should try and build your world accordingly. Since you know that perfect tiles are the key to a long game, try and purposefully build holes in your map that you can easily fill. For example, have an empty spot where all the surrounding tiles have meadow borders. That’s an easy perfect tile!

As well, don’t place tiles that would leave holes with difficult biome combinations! Leave these spots open until you get a problematic tile. For example, you have a hole that is surrounded by four placed tiles already, and you need two houses and a field.

Don’t put more tiles around this hole, wait to fill in the hole first. Otherwise, you may need two houses, a field, and two trees, for example, and that is going to be very difficult to get (and to remember)!

  • Train Tracks and Rivers Guide

Another area of difficulty: train tracks and rivers. These are complicated tiles because they seriously limit your options by default. Most people intuitively know that, so they build train tracks and rivers away from their main map in a straight line.

That’s not a good idea though, because this way you’ll never get any perfect placements and will eventually run out of tiles.

  • A better way to deal with this problem is to try and have your train tracks and rivers run parallel to the borders of your map, with one or two empty spots in between, and then fill up these empty spots whenever you have the chance.
  • Make sure to not run across where you are growing a huge forest or town or wheat field though! Simply let your train tracks or rivers circle around and go back the way they came, again with one or two empty spots in between if necessary.
  • It is also advisable to always have multiple train tracks and river openings (on the same train track or river or on multiple ones) in order to have options!
  • Your map should always be somewhat round. If there are gaps, you should strive to fill them!
  • Water stations can be connected to rivers as well as train tracks! Use those wisely! Plus, water (as in lakes/water stations) will perfectly fit more water, but also meadows!

Lastly, remember to take breaks! Rome wasn’t built in a day. Your masterpiece shouldn’t be either. The longer your session lasts, the more you’ll make mistakes due to a lack of concentration. Leave the game and do something else for a while, then come back to it later. It’ll still be there.


You can follow us on Twitter and drop a like on Facebook to get the latest update on guides for Mobile Games, PC Games, Fixes, and Settings. We also have a YouTube channel where we upload the latest gaming content for PC and Android. Feel free to check that out at your own leisure. Got specific suggestions? You can submit them here. Thanks for reading!


Last Updated on May 24, 2022

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top